Pergola Cost in San Antonio: What Homeowners Pay in 2026
Most professionally built pergolas cost $2,118 to $6,433, with a national average of $4,253, according to HomeAdvisor’s 2026 cost data. That works out to roughly $30 to $60 per square foot installed. Where your project lands depends on size, material, how the structure attaches, and what you add to it.
Most contractors dodge the price question. We would rather you budget before you call. This guide breaks down pergola cost in San Antonio by size, material, and add-ons, plus the climate and permit factors that are specific to Bexar County.
One thing to be clear on. No reliable source publishes a San Antonio-only pergola average. The figures below are national market data. Your actual price comes from an on-site quote.
Pergola Cost at a Glance
| Measure | National figure (2026) |
|---|---|
| Average installed cost | $4,253 |
| Typical range | $2,118 to $6,433 |
| Cost per square foot | $30 to $60 |
| Share of cost from materials | About 80% |
| Typical labor cost | $500 to $1,000 |
Source: HomeAdvisor, updated June 2026. These are general market estimates, not Alamo Decks & Fence pricing.
Pergola Cost by Size
Size is the easiest number to control. At $30 to $60 per square foot, a 12×12 pergola runs about $4,320 to $8,640 installed.
| Pergola size | Square feet | Estimated installed cost |
|---|---|---|
| 10×10 | 100 | $3,000 to $6,000 |
| 10×12 | 120 | $3,600 to $7,200 |
| 12×12 | 144 | $4,320 to $8,640 |
| 12×16 | 192 | $5,760 to $11,520 |
| 16×16 | 256 | $7,680 to $15,360 |
| 20×20 | 400 | $12,000 to $24,000 |
We calculated these from HomeAdvisor’s national $30 to $60 per square foot range. They are budgeting estimates, not quotes. Bigger is not always a straight line. Longer spans need heavier beams or extra posts, which can push large pergolas past simple per-foot math.
Pergola Cost by Material
Material moves your price more than anything else. HomeAdvisor reports materials make up about 80% of a pergola’s total cost. Here is how common pergola materials compare.
| Material | National cost, 100 sq ft installed | Upkeep in San Antonio | Best fit |
|---|---|---|---|
| Vinyl | $1,000 to $3,000 | Almost none. Fade resistant. | Low-maintenance yards, limited color needs |
| Aluminum | $1,000 to $3,000 | Low. Will not rot or warp. | Attached structures, fast installs |
| Cedar | $2,500 to $3,500 | Stain to hold color. Resists rot and insects. | Natural wood look that handles our climate |
| Pressure-treated pine | $2,500 to $4,000 | Paint or stain. Can warp or crack over time. | Painted finishes, tight budgets |
| Fiberglass | $5,000 to $6,000 | Low. Easy to paint. | Long spans without extra posts |
Sources: vinyl, aluminum, cedar, and pine from HomeAdvisor (2026). Fiberglass from LawnStarter at $50 to $60 per square foot (2025). National estimates only.
Two things worth knowing before you compare:
- Low vinyl and aluminum prices often reflect prefab kits. Fixr separates prefab from custom-built pergolas, and custom work costs more.
- Pine is the cheapest lumber, not always the cheapest build. National installed data puts it close to cedar. Cedar’s natural rot and insect resistance usually makes it the better value here.
Want a louvered system with slats that open and close? Expect it at the top of the range. No current, reliable source publishes a solid installed figure, so get it quoted.
What Drives Pergola Installation Cost
Size and material set the baseline. These five factors decide where you land inside the range.
Size and Span
A longer span needs heavier beams or more posts. Every added post means another footing, more lumber, and more labor. A slightly smaller footprint can sometimes drop you into a lighter frame.
Attached vs. Freestanding
An attached pergola uses two posts instead of four, which saves material and digging. The tradeoff is the ledger board. It has to be properly flashed and tied into your roofline. A freestanding pergola needs four posts and four footings, but it can go anywhere in the yard. See our guide to pergolas and patio covers on decks for how each option works with what you already have.
Labor
HomeAdvisor puts typical pergola labor at $500 to $1,000, with crews billing $250 to $500 per hour. Complex designs, exotic woods, and tight access push that higher.
Site Preparation
Grading, clearing, and drainage work all add labor before framing starts. Footings matter more here than in most markets. Bexar County clay swells when wet and shrinks when dry, and posts set without accounting for it can shift.
Add-Ons and Upgrades
The structure is only part of the bill. Common upgrades include:
- Fabric canopy or louvered panels for more shade
- Lattice, screens, or curtains for privacy
- String lights, ceiling fans, a chandelier, or outdoor speakers
Anything powered needs wiring, and electrical work requires a licensed electrician. Budget for it up front. Adding power after the build costs more than planning it in.
How San Antonio’s Climate Affects Your Pergola Budget
San Antonio averages about 122 days a year at 90°F or hotter, per National Weather Service climate normals. July and August each average more than 28 of those days. That changes what is worth paying for.
- Shade is the priority. An open-slat pergola filters sun. It does not block it. If you want the space usable on August afternoons, budget for tighter rafter spacing, a canopy, or louvered panels.
- Rain comes in bursts. May is our wettest month at about 4.4 inches. A pergola will not keep you dry. If rain coverage matters, compare against a solid patio cover.
- Material choice pays off long term. Heat and humidity punish untreated wood. Cedar resists rot and insects naturally. Vinyl, aluminum, and fiberglass skip staining entirely.
The cheapest pergola is not the best value if you stop using it from June through September.
Do You Need a Permit for a Pergola in San Antonio?
Plan on it. The City of San Antonio says a building permit is typically required to build a structure on your property, and it treats pergolas as accessory structures.
How the city routes it, per its residential permit matrix:
- One story, 1,000 square feet or less: Residential Improvements Permit.
- Over 1,000 square feet or two stories: Residential Building Permit with plan review.
- Fans, lights, or outlets: A separate electrical permit, pulled by a licensed electrician.
Three more approvals catch people off guard:
- HOA approval. A city permit does not satisfy your HOA. Get written architectural approval before work starts.
- Historic districts. Homes in districts like King William go through the city’s Historic and Design Review Commission, which has reviewed pergola attachment details there.
- Suburban cities. Converse, Cibolo, Universal City, and other cities around San Antonio run their own permit offices with their own rules.
The city lets registered residential building contractors pull permits on a homeowner’s behalf. We handle the permit process on every build. Permit time and HOA review happen before construction, so build them into your schedule.
Pergola Cost FAQs
How much does a 12×12 pergola cost in San Antonio?
About $4,320 to $8,640 installed, based on the national $30 to $60 per square foot range. Material and attachment move it within that band.
What is the cheapest pergola material?
Vinyl and aluminum carry the lowest national installed ranges, at $1,000 to $3,000 per 100 square feet. Pressure-treated pine is the cheapest lumber, but it needs more upkeep in our heat.
Is a pergola cheaper than a patio cover?
Usually, yes. A pergola has an open roof, so it uses less material. A patio cover adds a solid roof that blocks rain. See current patio cover ranges on our pergolas and patio covers page.
Can you add a pergola over an existing deck?
Yes. The deck has to carry the added load, which can mean new footings. Read more on adding a roof or pergola over your deck.
Can I finance a pergola?
Yes. We partner with Hearth for financing from $1,000 to $250,000. You can check rates without affecting your credit score. Details are on our financing page.
When is the best time to build a pergola in San Antonio?
Fall and winter. Crews have more availability and nobody is framing in triple-digit heat. Book in the cooler months and the space is ready by spring.
How long does pergola installation take?
Most builds take a few days to two weeks on site. Size, material, and weather set the pace. Permits and HOA approval add time before that.
Get Your Pergola Price from Alamo Decks & Fence
National averages get you a budget. A site visit gets you a real number. Alamo Decks & Fence designs and builds custom pergolas and patio covers in San Antonio and across Bexar County. We build in cedar, vinyl, and fiberglass, and we pull the permits.
Adding a pergola to a new outdoor space? We also build custom decks, and our post on creative pergola uses has ideas for the finished space.
Free estimates. Call us at (210) 361-6347 or get a free quote online.

BUILD YOUR FENCE TODAY!
If you’re looking to beautify and enhance the security of your property, turn to Alamo Decks & Fence in Bexar County. We truly value our customers, which is why you can trust us to build your fence using the highest quality materials at the best prices possible.