An automatic driveway gate is two purchases in one. You buy the gate. Then you buy the system that moves it. Most budget surprises come from the second half.

Here is the short answer. Based on the jobs we see across Bexar County, an automated driveway gate with a motor and keypad runs about $4,500 to $12,000+ installed. A manual single swing driveway gate runs about $1,500 to $4,000. Those are ballpark ranges, not quotes. Your number depends on your driveway, your gate and how much electrical work your site needs.

How Much Does an Automatic Driveway Gate Cost in San Antonio?

Most San Antonio homeowners should plan for $4,500 to $12,000+ for a finished automatic driveway gate. The table separates our local ballpark from national cost-guide figures, so you can see where each number comes from.

ItemTypical RangeWhere the Number Comes From
Manual single swing driveway gate, installed$1,500 to $4,000Alamo Decks & Fence ballpark, Bexar County jobs
Automated driveway gate with motor and keypad, installed$4,500 to $12,000+Alamo Decks & Fence ballpark, Bexar County jobs
Gate motor only$560 to $4,750National estimate (HomeAdvisor)
Labor to install an electric gate$750 to $4,800National estimate (Fixr)

National guides often show lower totals. Many price lighter, off-the-shelf gates, or quote the opener without the gate, posts and wiring. A custom steel gate built for your opening, hung on properly sized posts and wired to code costs more. Treat a low national average as a floor, not a target.

Going from manual to automatic is the biggest jump in price. HomeAdvisor puts installation at 50% or more of total project cost, which is why the labor and electrical side deserves as much attention as the gate itself.

What Drives Automatic Driveway Gate Cost

Seven things move your price. Some you choose. Others your property chooses for you.

1. Gate Size and Opening Width

A wider opening means more steel, a heavier gate and a stronger operator to move it. A double swing gate also means two gate leaves and, in most setups, two arms or a dual operator.

2. Swing vs. Slide Gates

We build both swing and slide vehicular gates, and your site usually decides which one fits.

  • Swing gates come as single or double swing. They need enough clearance inside the property to arc open.
  • Slide gates move parallel to the fence line. They suit tight or sloped driveways and come in standard slide or cantilever designs.

National guides show swing and slide gates landing in overlapping price ranges. Pick by layout, not by sticker price. Forcing a swing gate onto a sloped drive costs more in fixes than you save up front.

3. Gate Material and Finish

We fabricate vehicular gates in three main options:

  • Steel-framed gates for strength and stability
  • Ornamental iron style gates for a classic look
  • Aluminum gates where reduced weight matters

Weight ties straight to cost. A heavier gate needs a stronger operator, bigger posts and sturdier hardware. Finish matters too. South Texas sun and moisture break down cheap coatings, so a proper protective finish is money well spent. Our guide to the best fence material for Texas weather covers how each metal holds up here.

4. The Opener and Access Controls

The opener is the heart of an automatic gate. Control options include a keypad, remote or app control. Every motorized gate also needs safety sensors so it stops if a person, pet or car is in its path. Gate operators sold in the U.S. are built to the UL 325 safety standard, so skip any bid that treats sensors as optional.

5. Power and Electrical Work

This is the line item most rough estimates leave out. Your gate runs on hardwired power or solar, depending on access to electrical at the gate post. A gate set far from the house needs a longer trench, more conduit and more wire.

Automated gates also need an electrical permit and a licensed electrician. When you compare bids, ask each contractor how the electrical work and permit are handled and whether they are included in the price.

6. San Antonio Ground Conditions

The ground under your driveway changes the install, and the price.

  • North of Loop 1604, around Stone Oak and Timberwood Park, shallow limestone means posts get rock drilled. That adds time per post.
  • South-side clay swells and shrinks with the seasons, so footings get sized for that movement.
  • Slope affects which gate type works and how much layout work the install takes.

Gate posts carry weight line posts never see. We size them up and set them deeper.

7. Fencing, Permits and HOA Rules

Tying a gate into an old fence line can mean new posts or repairs on either side. Planning a custom fence installation and a matching gate at the same time keeps the look consistent and the budget tighter.

The City of San Antonio requires a building permit for new fence work inside city limits. If you live in an HOA, have your architectural guidelines ready before design starts.

Where Will Your Project Land in the Range?

Use this as a quick gut check before you call for quotes.

Your Project Looks Like ThisExpect to Land
Single swing gate, standard width, level driveway, power close to the gate postLower end of the range
Double swing or slide gate, steel frame, moderate electrical runMiddle of the range
Wide custom steel gate, long trench to power, rock drilling or a steep slopeUpper end, and possibly above it

Ongoing Costs to Plan For

The purchase price is not the last check you write.

  • Hinges and moving parts. Gate hinges take the most cycles. A drop of lubricant each year keeps them square.
  • Finish touch-ups. Wash the gate once a year and touch up chips before rust spreads. Aim sprinkler heads away from the gate.
  • Safety checks. Test the sensors regularly. A sensor that fails silently is a safety problem, not just a repair bill.
  • Slide gate clearance. Keep debris, mulch and soil clear of the gate path so the operator is not fighting extra resistance.

If an existing fence or gate is sagging, leaning or rusting, see our fence repair service.

How to Keep Your Automatic Gate Budget on Track

  1. Choose the gate type by site, not style. Clearance and slope decide swing vs. slide.
  2. Plan the gate with the fence. One design, one crew, fewer change orders.
  3. Ask about power first. Find out where the nearest electrical source is and who handles the permit.
  4. Get it in writing. We measure on site and put the number in writing before any work starts. Our list of mistakes to avoid when hiring a fencing contractor covers what else to check.
  5. Spread the cost if you need to. We offer financing through Hearth so you can move forward without paying everything up front.

Automatic Driveway Gate Cost FAQs

How much does an automatic driveway gate cost in San Antonio?

Most automated driveway gates with a motor and keypad run about $4,500 to $12,000+ installed, based on jobs we see across Bexar County. Gate size, material, gate type, electrical work and ground conditions set where you land. An on-site measurement is the only way to get an exact number.

Is a sliding gate more expensive than a swing gate?

Not always. National cost guides show the two in overlapping ranges. Your driveway decides more than the gate style. Swing gates need interior clearance. Slide gates fit short or sloped driveways where a swing gate cannot open.

What adds the most to automatic gate cost?

Automation and installation. A long electrical run, rock drilling north of Loop 1604 and a heavy custom steel gate push the price up fastest.

Do I need a permit for an automatic gate in San Antonio?

Yes. Automated gates need an electrical permit and a licensed electrician. New fence work inside San Antonio city limits also needs a building permit. HOA approval may apply on top of city rules.

Should I choose solar or hardwired power?

It depends on access to electrical at the gate post. Hardwired power makes sense when a power source is close. Solar can make sense when running power to the gate would mean a long trench.

Are automatic driveway gates safe?

Yes, when they are designed and installed correctly with proper safety features. Every motorized gate needs safety sensors that stop the gate if a person, pet or car is in its path.

Get an Exact Number on Your Driveway Gate

Ballpark ranges help you plan. A site visit gives you the real number. Alamo Decks & Fence designs and installs custom metal driveway gates for homes and businesses across San Antonio and nearby areas. We measure your opening, check your ground and power access, and put the price in writing before work starts.

Call (210) 320-2138 or request your free estimate. See what San Antonio homeowners say about our work on our reviews page.

BUILD YOUR FENCE TODAY!

If you’re looking to beautify and enhance the security of your property, turn to Alamo Decks & Fence in Bexar County. We truly value our customers, which is why you can trust us to build your fence using the highest quality materials at the best prices possible.

To Receive Your Free Estimate
Call us at 210-320-2138